SMT Squeegee Blade Cleaning Machine
1.Fully automated cleaning mode:The productrotates360degrees,with pre-heated cleaning
solution first undergoing ultrasonic and spray cleaning through automatic processes,followed
by spray rinsing and final hot air drying across the entire work flow.
2.Full-process visualization:The automatic door features a visual tempered glass window,
allowing the cleaning process to be clearly observed at a glance.
3.Scientific nozzle design(patented):
Utilize supper and middle spray arms for distribution—completely resolving cleaning blinds
pots,with detachable spray arms and nozzles;
4.Cleaning and rinsingutilizeanonlineindependentbuilt-infiltrationsystem:
featuringadedicatedelectricpump,separatepipelines,andsolventrecyclingto preventcross
contaminationduringcleaningandrinsingprocesses.
This design enhances the service life of rinse water and reduces solvent consumption.
5.Body material:The entire stainless steel body is resistant to acidic and alkaline cleaning
solutions.
Device characteristics
-Cleaning zone:
The cleaning storage tank is used for recycling and storing cleaning solution,with three-stage filtration,heating,and liquid level monitoring of the cleaning solution.
Cleaning pump:1.1kW(1unit),ultrasonic transducers:32units(50Wperunit),2sprayarms,and24nozzles;
Storage tank volume:≤58L(1unit);
Filtering device: stainless steel filter screen1mm(2pieces),liquid tank filter bag:50mesh(1piece),on line cleaning filter core0.45μm(3pieces).
Heating power:6kW(1unit);Heating
temperature:room temperature to 80°C(adjustable);
Level protection:low position,middle position,stop position;
Spray pressure:0.1-0.5MPa(adjustable)
-Rinse zone:
The rinse storage tank is used for recycling and storing water,as well as performing two-stage filtration,heating,and liquid level monitoring of the rinse water.
Rinsing water pump:1.1kW(1unit),equipped with 2spray arms and 24nozzles;
Volume of rinsing water storage tank:≤46L(1unit);
Heating power of rinse water tank:6kW(1unit);Heating temperature:room temperature to80°C(adjustable);
Filtering device: Stainless steel filter screen1mm(2pieces),Water tank filter bag:50mesh(1piece);
On line filter core for cleaning:0.45μm (1piece)
Level protection:low position,middle position,stop position;
Spray pressure:0.1-0.5MPa(adjustable)
-Drying zone:
The drying section is used for complete product drying,with air heating,air cutting,heating,and temperature monitoring.
Fan:2.2kW(1unit),stainless steel heating tube:1.2kW(1unit),two air rods,heating temperature:room temperature to60°C(adjustable);
Cleaning basket running mechanism: The running mechanism consists of a stepper motor,stepper driver,and encoder for smooth rotation.
Stepper motor:1set;Stepper driver:400W(1unit),encoder:1unit;
Device Parameter:
Content | Parameter |
Cleaning turntable basket size:
| Length:600mm,Diameter:150mm. Thescrapercanaccommodateupto6blades |
Workload | Within 60cm range,Approximately 20KG |
Cleaning time | 0-100minutes(adjustable) |
Rinse time | 0-100mintues(adjustable) |
Drying time | 0-100minutes(adjustable) |
Exhaust port size | φ76X30mm(H)with out reinforcement for exhaust ventilation
|
Power /Gas source | 3P5W system,380V/10kW(rated power)
|
External dimensions
| 1305mm(L)x1155mm(W)×1352mm(H)
|
Machine net weight
| ≈420KG |
